Introducing the Tower Adventurer 2 Inflatable SUP
Includes a 10'4" by 32" by 6" inflatable SUP, a high-end Tower branded diamond grooved deck pack, a 2+1 fin configuration with a removable center fin, a hand hold strap, a roll-up carrying strap, a towing ring on the nose, a cargo net, an extra handle in the front and back, and a lease attachment ring on the tail.
A Giant Leap forward in Inflatable SUP DesignVirtually all 4" inflatable SUPs (which is pretty much all inflatable SUPs on the market) leave a lot to be desired. That's putting it nicely. They sag in the middle and ride low in the water so you end up standing in a puddle of cold water, which is miserable. The sagging and undulating ride also slows you down. The 6" thick, military grade Tower Adventurer 2 inflatable SUP is dramatically more rigid, plus it floats higher in the water so you don't have to worry about standing in puddles. But this is only one of the many advances that set the Tower Adventurer 2 inflatable SUP apart from the competition.
The Predecessor to the Adventurer 2 is the Best Selling & Best Rated iSUP Worldwide (and now we've improved it!)
The Tower Adventurer 2 Inflatable SUP is made from extremely rugged materials like those you would find on the highly regarded Zodiac boats and extreme river rafts. The amazing rigidity in the Adventurer 2 is created by thousands of vertically oriented strands of identical length that connect the top deck to the bottom. When inflated, they form a structure that has the rigidity of a piece of plywood, and the thicker you go the exponentially more rigid it gets. You will be amazed. We can literally put the front tip of the 10'4'' x 6" Tower Adventurer 2 on one chair and the rear tip on another chair and a 200 lb person can stand in the middle and you can barely see the thing flex. Do this with most 4'' inflatable SUPs and they will taco almost to the floor. Even 3/4'' plywood flooring would probably break over this almost 10' span.
A Viable EPS/EPOXY Board Alternative - We are not kidding!
Traditionally, inflatable SUPs were only a consideration for traveling - store one in the cuddy cabin on your yacht, take it with you on the place, or haul it into that secret mountain lake or river and you can stand up paddle board in the farthest corners of the Earth. With the rigidity of the Tower Adventurer 2, an inflatable SUP is now also a viable EPS/EPOXY board alternative for anyone who isn't a die-hard surfer.
Benefits of an Inflatable SUP over an EPS/EPOXY Board
Easier to store - When rolled up, it is 1 foot in diameter and 33'' wide.
Indestructible - Never worry again about dings and board cracks. I've literally thrown these things off a 2nd story deck and I frequently set it down anywhere (gravel, a parking lot, even on cement stairs).
Easier to transport - No need for roof racks. About the size of a rolled sleeping bag, it easily fits in any car or boat, can be checked on a plane, and can even be strapped onto a bicycle or motorcycle.
Softer - You can literally play pumper boats with these. Kids can jump from one board to the other like they're jumping on an inner tube. You won't get knocked out in the waves either.
Easy on the feet - While very rigid, the air does cushion your feet a lot more than a hard board, no matter how good the deck pad is.
Less expensive - Which also makes it a great idea as a second board for travel or guests.